This is the June 13th CNC SIG with Lou Adzima talking about 4th Axis turning on his Legacy Maverick 3X5 5-Axis CNC. He also gives good information about some of the software that he uses.
Watch the video and join the conversation!
From the chat window:
10:21:41 From Doug LaRue : searched Amazon for “tilt meter” Here is a Wixey brand version: https://www.amazon.com/Wixey-WR300-Type-Digital-Backlight/dp/B00T6YZ0K6/
10:21:54 From The Fords : thx Doug
10:29:55 From Rob Sandstrom To SD Fine Woodworkers(privately) : Can you ask if he has plans for his 3d made clamps and clamping board that he is going to make another of.
10:34:19 From Travis Good : Festool MFT DIY Clamping System by J-Max - Thingiverse
10:35:31 From Paul Schankin : thx travis
10:35:39 From Rob Sandstrom To SD Fine Woodworkers(privately) : thanks Travis
10:59:18 From Travis Good : http://www.cadandgraphics.com/
11:00:19 From Travis Good : null - YouTube
11:04:09 From Travis Good : https://www.amazon.com/ISOtunes-Bluetooth-Headphones-Reduction-Cancelling/dp/B01NCOEFQT/ref=sr_1_4?crid=2Q5DWNLXYMN2C&dchild=1&keywords=isopro+headphones&qid=1592071429&sprefix=isopro+head%2Caps%2C214&sr=8-4
11:04:52 From Travis Good : The above are TurboCAD, then TurboCAD Training videos then ISOtunes headphones.